Operating Your Standards Converter / TBC
KRAMER ELECTRONICS, LTD.
6
5 Operating Your Standards Converter / TBC
Section 5.1.1 describes how to convert a Standard and section 5.1.2 describes
how to adjust specific Control levels.
5.1.1
Converting a Standard
To convert a Standard, do the following:
1. Press the Input Selector button
1
to select either INPUT A or INPUT B.
The appropriate LED illuminates
2
.
2. Press the INPUT button
3
to select the desired input standard
4
.
The red LED illuminates
above the appropriate LED label.
3. Press the OUTPUT button
5
to select the desired output standard.
The green LED illuminates
below the appropriate LED label and the
selected input standard converts to the selected output standard.
5.1.2
Adjusting the CONTROL Levels
Figure 3 illustrates the SELECT button sequence:
CONT
BRIGHT
COLOR
HUE
H PHASE
V PHASE
Figure 3: SELECT Button Sequence
To adjust a specific CONTROL level:
Press the SELECT button
The appropriate
CONT
,
BRIGHT
,
COLOR
and/or
HUE
LED illuminates
Press the + button or - button to increase or decrease the current level
To adjust the
HORIZONTAL PHASE
of the TBC input:
Press the SELECT button one or more times, according to the SELECT
button sequence
6
, until both the
CONT (CONTRAST)
and the
BRIGHT
(BRIGHTNESS)
LEDs illuminate and press the + button or - button to increase or
decrease the current phase
1 Item 18 in Figure 1
2 Item 16 or 17, respectively
,
in Figure 1
3 Item 3 in Figure 1
4 Or press the AUTO button to automatically recognize the input standard
5 Item 2 in Figure 1
6 For example, if the BRIGHT LED presently illuminates, press the SELECT button 3 times to simultaneously illuminate the
CONT (CONTRAST) and the BRIGHT (BRIGHTNESS) LEDs for HORIZONTAL PHASE
