![background image](http://html1.mh-extra.com/html/kramer/fc-4000/fc-4000_user-manual_2001558007.webp)
Your Standards Converter / TBC
KRAMER ELECTRONICS, LTD.
4
Table 1: Front Panel FC-4000 Standards Converter / TBC Features
# Feature
Function
1
POWER
Switch
Illuminated switch supplying power to the unit
2
OUTPUT
Button
Press to select the output standard, illuminating the appropriate LED
1
3
INPUT
Button
Press to select the input standard, illuminating the appropriate LED
2
4
AUTO
Button
Toggles between automatically recognizing the input standard (illuminating the
appropriate LED
2
) and the manual selection mode
5
NTSC 3.58
LED Label
Defines the INPUT or OUTPUT NTSC 3.58 standard
6
NTSC 4.43
LED
Label
Defines the INPUT or OUTPUT NTSC 4.43 standard
7
PAL
LED Label
Defines the INPUT or OUTPUT PAL (BDGH) standard
8
PAL M
LED Label
Defines the INPUT or OUTPUT PAL M standard
9
PAL N
LED Label
Defines the INPUT or OUTPUT PAL N standard
10
SECAM
LED Label
Defines the INPUT or OUTPUT SECAM standard
11
CONT
(
CONTRAST
) LED
Select the CONT
3
LED via the SELECT button. Adjust using the + and –
buttons
12
BRIGHT
(BRIGHTNESS)
LED
Select the BRIGHT LED via the SELECT button. Adjust using the + and –
buttons
13
COLOR
LED
Select the COLOR LED
4
via the SELECT button. Adjust using the + and –
buttons
14
HUE
LED
Select the HUE
5
LED via the SELECT button. Adjust using the + and – buttons
15
SELECT
Button
Press to select an H PHASE and V PHASE control
16
INPUT A
LED
Illuminates when selecting INPUT A
17
INPUT B
LED
Illuminates when selecting INPUT B
18 Input Selector Button
Press to select the input source, INPUT A or B
19 - Button
Press to decrease the control level
20 + Button
Press to increase the control level
Press the + and – buttons simultaneously
to reset the selected CONTROL
6
to its
default value
Table 2: Rear Panel FC-4000 Standards Converter / TBC Features
# Feature
Function
1
INPUT A Y/C
4p Connector
s-Video (Y/C) input
2
INPUT A CV
BNC Connector
Composite video input
3
INPUT A L
and
R
RCA Connectors
Audio input
4
GENLOCK
IN
BNC Connector
GENLOCK source
7
5
OUTPUT Y
BNC Connector
Component video output
6
OUTPUT B-Y
BNC Connector
Component video output
7
OUTPUT L
and
R
RCA Connectors
Audio output
8 Power Connector with Fuse
230 VAC, 50/60 Hz (115 VAC U.S.A) 5 VA power inlet
1 A green OUTPUT LED is positioned below the appropriate LED label
2 A red INPUT LED is positioned above the appropriate LED label
3 Select both the CONT (CONTRAST) and the BRIGHT (BRIGHTNESS) LEDs (simultaneously) to adjust the horizontal
phase of the TBC input (against GENLOCK input) using the + and – buttons
4 Select both the COLOR and the HUE LEDs (simultaneously) to adjust the vertical phase of the TBC input (against
GENLOCK input) using the + and – buttons
5 For an NTSC input only
6 Reset all the CONTROLS to their default values by simultaneously pressing the + and – buttons for more than 3 seconds
7 The FC-4000 unit functions as a Standards Converter when no video source is connected to the GENLOCK IN connector