Kramer FC-26, User Manual

Page: 37 / 64

Kramer Protocol 3000 33
11 Kramer Protocol 3000
The FC-26 can be operated using serial commands from a PC, remote controller
or touch screen using the Kramer Protocol 3000.
This section describes:

Kramer Protocol 3000 syntax (see Section
11.1
)

Kramer Protocol 3000 commands (see Section
11.2
)
11.1 Kramer Protocol 3000
– Syntax
11.1.1 Host Message Format
Start Address
(optional) Body Delimiter
# Destination_id @ Message
CR
11.1.1.1 Simple Command
Command string with only one command without addressing:
Start Body Delimiter
#
Command SP
Parameter_1,Parameter_2,…
CR
11.1.1.2 Command String
Formal syntax with commands concatenation and addressing:
Start Address Body Delimiter
# Destination_id @ Command_1
Parameter1_1,Parameter1_2,…|
Command_2
Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,… |…
CR
11.1.2 Device Message Format
Start Address
(optional) Body delimiter
~
Sender_id @
Message
CR LF
11.1.2.1 Device Long Response
Echoing command:
Start Address
(optional) Body Delimiter
~ Sender_id @
Command SP [
Param1 ,Param2 …
] result CR LF