10
Initial Configuration and Use Overview
2. Use
K-Touch
3.1 to discover the IP address of the
FC-26
.
You can also use
K-LAN Configurator
to discover the IP address of the
FC-26
.
3. Using a Web browser and the IP address discovered in step 2,browse to the
General Info home page (see
Figure 11
).
4. Click on Device Settings to browse to the Device Settings page, (see
Figure 13
).
5. Enter the time and date manually, or enter the Time server address for
automatic time and date synchronization.
6. Click Save Changes.
7. Click on Communication to browse to the Communication page, (see
Figure 14
).
8. Enter the IP address, mask and gateway for static IP addressing and Click
Set.
Note
: If you have changed the IP from the default setting, you must reload
the General Info home page again using the new IP address.
9. Click on Serial Ports Settings to browse to the Serial Port Settings page,
(see
Figure 15
).
10. Associate the required serial ports with their corresponding TCP/UDP
settings.
11. For each associated serial port, enter the serial port configuration
parameters using the drop-down lists under Serial Configuration.
12. Click Save Changes.
13. If required, click on Security to browse to the Security page.
14. Click ON to activate security.
The user name and password credentials popup appears.
15. Enter the required user name and password.
Summary of Contents for FC-26
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL FC 26 Ethernet Controller P N 2900 300463 Rev 1 ...
Page 2: ......
Page 63: ......
