Kramer FC-26, User Manual

Page: 12 / 64

8 Defining the FC-26 Ethernet Controller
Figure 3 defines the rear panel of the FC-26.
Figure 3: FC-26 Ethernet Controller Rear Panel
# Feature Function
1
RS-232 6-pin
Terminal Block
1 Connect to the first RS-232 controlled device
2 Connect to the second RS-232 controlled device
2 IR OUTPUTS 1 ~ 4
3.5mm Mini Jacks
Connect to IR blasters/emitters using cables up to 80 m
(260ft) long
3 ETHERNET RJ-45
Connector
Connect to a PC or other controller directly or via a LAN
(see
Section
6.1
)
4 FACTORY RESET
Button
Press and hold while power-cycling the device to reset to
factory default parameters, (see
Section
10
)
5 5V DC Connector Connect to the 5V DC power supply, center pin positive.
Not needed when the device is supplied power by a PoE
provider