FC-132ETH - Protocol 3000
47
Command -
NAME-RST
Command Type - System (Ethernet)
Command Name
Permission
Transparency
Set:
NAME-RST
Administrator
Public
Get:
-
-
-
Description
Syntax
Set:
Reset machine (DNS) name to
factory default
#
NAME-RST
␍
Get:
-
-
Response
~nn@
NAME-RST
␠
OK
␍␊
Parameters
Response triggers
Notes
Factory default of machine (DNS) name is “KRAMER_” + 4 last digits of device serial number
Command -
NET-DHCP
Command Type - Communication
Command Name
Permission
Transparency
Set:
NET-DHCP
Administrator
Public
Get:
NET-DHCP?
End User
Public
Description
Syntax
Set:
Set DHCP mode
#
NET-DHCP
␠
mode
␍
Get:
Get DHCP mode
#
NET-DHCP?
␍
Response
Set: ~nn@
NET-DHCP
␠
mode
␠
OK
␍␊
Get: ~nn@
NET-DHCP
␠
mode
␍␊
Parameters
mode
- 0 - Do not use DHCP. Use the IP set by the factory or using the IP set command
1 - Try to use DHCP. If unavailable, use IP as above
Response triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
For proper settings consult your network administrator