Kramer FC-132ETH, User Manual, Page: 16 / 61

12 FC-132ETH - Initial Configuration and Use Overview
12. If required, click on Security to browse to the Security page.
13. Click ON to activate security.
The user name and password credentials popup appears.
14. Enter the required user name and password.
6.2 Configuring a Virtual Port on the PC
If the control application cannot work with an Ethernet driver, download the Kramer
VSPM from our Web site to set a virtual port for each local port on your
FC-132ETH .
The Kramer VSPM software lets you emulate virtual ports which normally would be
present in the machine hardware. After setup, the virtual port lets you control
Kramer machines via your PC.
6.3 Configuring an Ethernet Connection on the PC
If the control application can directly connect to the Ethernet driver, select the host
IP and port number according to your FC-132ETH configuration, as illustrated in
Figure 4 .
Figure 4: The Port Window
– Selecting a Remote Connection
6.4 Switching Ports on the FC-132ETH
You can switch ports either locally using the front panel buttons or remotely using
the Web pages, (see Section
‎9.3
).
To switch ports locally on the FC-132ETH :
1. Select the required output Port using the + and
–
Port buttons.
The Data buttons flash and the selected output is displayed on the readout.