F-121UK - Installing the F-121UK
9
9
5. Insert the bracket tabs into the opening on each of the red Ackermann
plastic parts and attach both parts.
6. Place the plastic parts with the connected brackets over the Ackermann box
and screw tight in three places (two underneath and one on top).
7. Place the
F-121UK
main part over the brackets and tighten to the brackets
using the four screws you previously put to one side (in step 4).
8. Push the Ackerman box into the floor box, by applying force if necessary.
You do not need to repeat this procedure when connecting or disconnecting the
lines, just remove the
F-121UK
by unscrewing the four screws and then replacing
them.
Summary of Contents for F-121UK
Page 16: ...14 F 121UK...