![background image](http://html1.mh-extra.com/html/kramer/f-121uk/f-121uk_user-manual_2002397010.webp)
8
F-121UK - Installing the F-121UK
12V DC power supply to the power terminal blocks (connect the wire
labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin)
taking care that the polarity is correct (see
Figure 4
)
5.3
Installing the F-121UK inside the Ackermann Floor Box
To install the
F-121UK
inside the Ackermann floor box:
1. Remove the Ackermann box from the Ackermann floor box.
2. Unscrew the three screws holding the box together: one on the lower side of
the box and the third one on top.
3. Separate the two red plastic parts.
4. Unscrew the two screws on each side of the brackets on the
F-121UK
(four
in total) and put the screws to one side (you will need them later; see step
7).
Summary of Contents for F-121UK
Page 16: ...14 F 121UK...