Step 5: Set the DIP-switches
Video Switching Selection
DIP-switch 1
DIP-switch 2
Video Input Selection
Off (up)
Off (up)
Automatic
—Last connected. The last source
connected to the unit is routed to the output
Off (up)
On (down)
Automatic
—Priority selection.
HDMI IN 1
HDMI IN 2
PC IN
(default, high to low priority)
Different priority cycles can be specified using the
Video & Audio Settings Web page
On (down)
Off (up)
Manual
On (down)
On (down)
Manual
Audio Switching Selection
DIP-switch 3
DIP-switch 4
Audio Input Selection
Off (up)
Off (up)
Automatic
—Priority selection.
Embedded HDMI
analog Audio IN
(high to low priority)
Off (up)
On (down)
Automatic
—Priority selection.
Analog Audio IN
embedded HDMI
(high to low priority)
On (down)
Off (up)
Embedded HDMI
On (down)
On (down)
Analog Audio IN
Step 6: Connect the power
Connect the 12V DC power adapter to the
DIP-31M
and plug it into the mains electricity.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
for updated safety information
Step 7: Operate the DIP-31M
To operate and control the
DIP-31M
use:
Front Panel
Buttons
HDMI IN 1 Select
HDMI IN 2 Select
PC IN Select
STEP-IN
Remote Control Switches
PC/HDMI
—
input
selection/VGA
phase shift
adjustment
Short press
—Input toggle
Long press
—Adjusts the VGA
phase shift)
STEP IN
Activates the step-in function if
relevant
VOL UP
—
analog audio
output volume
increase
control
Short press
—Increases the
volume one step
Long press
—Increases the
volume from 0% to 100% in 10
seconds
VOL DN
—
analog audio
output volume
decrease
control
Short press
—Decreases the
volume one step
Long press
—Decreases the
volume from 100% to 0% in 10
seconds
GND
Connect to the common side of
the switches
Web Pages from IP 192.168.1.39
