Kraft Powercon PRX 110/16, Manual

Page: 8 / 27

8
KraftPowercon Sweden AB, Hjalmar Petris väg 49, 352 46 Växjö, Sweden, Tel: 0470-705200, Fax: 0470-705201,
www.kraftpowercon.com
3.1.4 Electrical data for rectifier module
Model
designation,
rectifier
module
Output data Input data
Power
loss
*2
U
NOM
Setting
range
I
RATED
Voltage
range
*3
Mains
power
*1
Mains
current
*1
(V
DC
) (V
DC
) (A) (V
AC
) (VA) (A
rms
)
PCS 24/36
24 22 – 33
36 90 - 290 1150 6 150
PCS 24/70 70 90 - 290 2200 12 175
PCS 48/18
48 42 – 63
18 90 - 290 1150 6 135
PCS 48/50 50 90 – 290 2900 15 210
PCS 110/8
110 100 – 158
8 90 – 290 1150 6 135
PCS 110/16 16 90 – 290 2200 12 160
PCS 110/22 22 90 – 290 2900 15 200
PCS 220/10 220 187 – 292 10 90 - 290 2700 14 200
*1 : max at 195 V
AC
*2
: type at 230 V
AC
and full load
*3
: Power derating below 190 V
AC
.
3.2 Environmental data
Class of enclosure ...................................................... IP21 as per EN 60529
Cooling........................................................................ Temperature controlled fans in rectifier
modules
Ambient temperature (specified data applies) ...... 0 to +40 °C
Storage temperature .................................................. -40 to +70 °C
Humidity .................................................................... <90 % RH, non-condensed
Altitude above sea ..................................................... <2000 m
Noise level at 1 m, +20 °C, 25 % load ..................... <50 dBA
3.3 Mechanical data
Design ......................................Wall cabinet
Arrangement ...........................On a wall indoors in dry, clean room
Weight ......................................18 kg, fully equipped
Dimensions..............................400/274/333 mm (h/w/d), see also dimension diagram
Appendix_A
Colour ......................................RAL 7035 light grey
Cable inlets ..............................From underneath
3.4 Conformity with standards
EN 60529 .............................. Class of enclosure IP21
EN 50178 .............................. LVD. Electronic equipment, including power electronics in electrical
power installations.
EN 50272-2........................... Safety requirements for secondary batteries and battery installations
EN 61000-6-2 ....................... EMC. Immunity for industrial electronics
EN 61000-6-4 ....................... EMC. Emission from industrial electronics