18
KraftPowercon Sweden AB, Hjalmar Petris väg 49, 352 46 Växjö, Sweden, Tel: 0470-705200, Fax: 0470-705201,
www.kraftpowercon.com
initial equalizing charge. Always follow the recommendations given by the battery
manufacturer.
7.4
CHECK OF CHARGING VOLTAGE
Check the settings of the monitoring units to ensure the voltage level for float charging and
equalizing charging conform to the battery manufacturer's specifications, see
Manual for
monitoring unit PCM2
.
When the battery is charged to a level where the “High current” alarm is no longer active, you
should check that the actual output voltage conforms with the set float charging voltage, see
section 0
7.5
CHECK OF SETTINGS
Each time the monitoring unit has been without voltage, the built-in clock must be set with the
current date and time, see the
Manual for monitoring unit PCM2
.
Check that the measurement values presented agree with the actual position. Check that the
parameters for charging voltages, alarms and other parameters conform with the intended
function, see the
Manual for monitoring unit PCM2
.
7.6
CHECK OF OUTPUTS
The alarm outputs A-D and the output for fan control can be operated manually for simple and
smooth control of external circuits, see the
Manual for monitoring unit PCM2
.
