kozy heat CAMBRIDGE CMB-31, Installation & Operating Manual

Page: 18 / 34

Page 16
K. LOG INSTALLATION
- Log Set #CMB-500
This log set includes 11 logs and 1 pkg. rock wool burning embers.
Note: Each log is numbered on the bottom and should be installed according to
the instructions and diagrams below.
1. Install base logs, C1, C2, C3, onto the burner as
shown in Figure K-1, aligning the mounting holes in
the bottom of the logs to the mounting studs in the
burner.
2. Install the ember logs, C4, C5 & C6 onto the front of
the burner as shown in Figure K-1.
3. Install middle log C7, and top logs C8, C9, C10, &
C11 onto the base logs as shown in Figure K-2
aligning the logs to the corresponding notched out
sections in the base logs.
C1
C2 C3
C5 C4 C6
Figure K-1
C8
C9
C10
C11 C7
Figure K-2
4. Place rock wool burning embers as desired onto the logs and burner to enhance glowing effect and flame
appearance.
NOTE: You will not use all the rock wool ember material at this time. Save
for future use.
Completed Log Set Installation
L. COMPLETE THE INSTALLATION