Outlet Junction Box–Ember Bed Light Kit (auxiliary)
SECTION 9
ELECTRICAL INFORMATION
61
#BHM-38 & #BHM-38-BW
R.1 September 2021
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
9.3 Outlet Junction Box
This appliance is equipped with a (4) outlet junction box, located on
the left side of the unit. There are outlets for connecting the Kozy
Power Vent (see #KPV manual for more information), the ember bed
light kit, and the control module.
Remove the (4) screws securing electrical access cover to the firebox
outer shell for access to the junction box (
FIGURE 9.2)
. Reinstall when
finished.
9.4 Ember Bed Light Kit (auxiliary)
CAUTION: Disconnect all electrical power from the fireplace before
performing this task.
ATTENTION: If converting to propane, complete the conversion before
installing any light kit components. Follow instructions provided with
the conversion kit (sold separately).
NOTE: To avoid damage and prolong the life of the halogen bulbs,
never touch with bare hands. Always use a soft cloth when handling.
9.4.1 Install Ember Bed Light Kit
1. Remove the safety barrier screen and glass frame assembly.
2. Remove the media tray (see
FIGURE 9.3
).
3. Install (4) halogen bulbs (included in component packet) into
lamp bases.
4. Reinstall media tray.
5. Reinstall glass frame assembly and safety barrier.
Outlet junction box access
FIGURE 9.2
Electrical Access on Left Side of Unit
FIGURE 9.3
Auxiliary Light Kit Installation
