FACING AND FINISHING
17
4.3 Optional Trim Kit
Assembly #B41-FTK
#B41-FTK is for use with safety barriers #B41-PSF, #B41-FRSF,
#B41R-MSF, and #B41A-MSF.
IMPORTANT: This trim kit assembly must be attached before
fireplace installation.
NOTE: The top trim panel should be installed with the top stand
off brackets.
1.
If installed, remove and discard the existing bottom front
frame portion.
2.
Install the bottom trim panel with the lange positioned as
shown. Secure with (2) screws included in the ireplace
components packet.
3.
If installed, remove the top stand-ofs.
4.
Install the top trim panel. Align the holes in the top trim panel
with the front holes in the stand-offs and attach to ireplace
top. Secure with previously removed screws and screws
included in ireplace components packet.
5.
If installed, remove the nailing langes from the sides of the
ireplace.
6.
Install side trim panels, utilizing existing screws from the
top and bottom sides of the ireplace. Install nailing langes
after panels, using screws previously removed. Use screws
included in the components packet to complete side panel
installation.
Figure 4.3, Trim Kit Installation
