6
1. Frame an opening for fireplace, allowing for vent installation and type of installation (corner or flat wall application).
2. If masonry (optional) is used, prepare foundation for the masonry load. A lintel is required to support the added weight above fireplace.
3. Attach stand-off brackets and nailing flanges to fireplace.
4. Insert fireplace into framing.
5. Install hearth (if applicable).
6. Complete gas line installation.
7. Complete electrical hook-up. Install any standard or optional electrical components at this time.
8. Complete venting installation.
9. Secure fireplace to framing with nailing flanges. Verify all clearances at this point.
10. Install facing material, mantel or cabinetry.
11. Install burner media.
12. Install finishing material and any other optional accessories.
13.
Verify proper operation of fireplace and all components.
SPECIFICATIONS
INSTALLATION OVERVIEW
ADDITIONAL COMPONENTS REQUIRED
Vent System: Approved venting listed on page 17 of this installation manual.
NOTE
The qualified installer should follow the procedure best suited for the installation.
