25
LIGHTS
1. Remove glass frame assembly. Page 15.
2. Remove light access panel at inside top of firebox - secured with
(2) screws.
3. Using a 1/4 wrench, loosen but do not remove bulb clips located
inside light chamber.
4. Install (2) halogen bulbs (included in components packet) into
lamp bases. Reposition bulb clips over tips of halogen bulbs.
Retighten screws, being careful not to over-tighten causing bulbs
to shatter.
5. Reinstall access cover, securing with screws previously removed.
CAUTION
Disconnect all electric power from fireplace before performing this task.
NOTE
To avoid damage and prolong the life of halogen bulbs, never touch with bare hands. Always use a soft cloth when handling.
Figure 25a
Bulb clips
