Kozlusan SLIMPEL, Owner'S Manual

Page: 4 / 21

Page 4
SAFETY INSTRUCTIONS
 The pellet heater system may only be operated be in faultless technical condition. Malfunctions
and damage which affect or could affect safety must be corrected immediately by our trained
personnel.
 The assembly may only be conducted by our customer service, or by a certified specialist. The
system is equipped with rotating parts, which move with a relatively large turning movement
(crushing hazard).
 Under the casing and in the terminal box there are voltaged components. Do not remove the
casing or terminal box.
 Never open the inspection openings of the boiler while in continuous operation, hot exhaust gas
and dust may escape.
 The system should be turned off before the implementation of maintenance work. Wait until the
pellet boiler has cooled down (check the temperature on the display).
 The boiler needs to be switched off before carrying out the cleaning of the chimney. Wait until
the pellets have burned down completely (approx. 20 minutes – danger of explosion through
back up of exhaust gas.

Never pour flammable liquids into the burner.
 Never perform independent repair work on our system, call trained personnel!
 Put a signboard into the heating room that forbids to smoke or to use open light or fire.
 A certified fire extinguisher must be installed in the boiler room.
 Ensure enough air supply in the heating room.
 Secure the boiler room against unauthorized access, especially by children.
 Once a month, test the boiler doors and the water connections for leaks and damage.
 Once a year, test the safety temperature limiter.
 Safety and monitoring devices may not be removed, bypassed or taken out of service in any
other way.