13
SURROUND ASSEMBLY
1. Lay the surround pieces face down on a flat surface, as shown
in the diagram below. Be careful not to scratch the painted surface.
2. For optional 3 sided surround installations, discard the lower panel
and cut the optional side trims to the proper length.
3. Install the nuts and bolts as shown.
4. Slip the optional 3 piece picture frame or brass trim onto the outer
edge of the surround. Make sure the corner keys fit into the outer
trim pieces (picture frame trim only).
5. Pull the mitered corners together and tighten the screws in the
corner keys with a slotted screwdriver (picture frame trim only).
6. Install two sheet metal screws, through the metal surround sides,
into the aluminum trim pieces and tighten (picture frame trim only).
Summary of Contents for CDVI
Page 6: ...6 UNIT DIMENSIONS...
Page 26: ...26 RATING PLATE DIAGRAM...
