19
GB-088B_f.
For central heating circulation and hot water
tank in a daily harmonogram set starting time
(3) and finishing time (4) of maintaining chosen
temperature (5) in the room (central heating) or
of hot water (storage). Outside these periodically
set values, economy temperature will be kept
both in the room and the storage. To change
daily program select with the navigation dial
chosen time period and confirm it by pressing
the dial. The edition screen flashes, use the
navigation dial to set new value (hour and
minutes separately) and confirm it by pressing
the dial. At the same time, next screen starts to
flash allowing edition of next parameters.
Last editable time position is a command.
To confim changes use the dial to select
a command, ′accept′
and press the dial to
finish editing.
To delete time settings edit a given time, then,
by pressing the dial, get to commands, choose
′delete′ , and confirm it by pressing the dial.
To add new time settings, choose previous
time position, then by turning the dial go to
commands, choose ′add′ , and by pressing
the dial add new time settings, which can be
adjusted to user’s needs (description above).
Daily schedule:
CH PROGRAM No.1
END
1 6:00 - 9:15
2 15:20 - 22:15
2
3
4
5
6
1
[1] - time period panel
[2] - no. of time frame according to
schedule (max 5)
[3] - time of starting the selected tem-
perature
[4] - time of finishing the selected tem-
perature
[5] - temperature selection
[6] - command (active when editing):
accept
delete
add
