Kortel Design KOLIBRI EVO, User Manual

Page: 47 / 95

Your harness is equipped with an integrated
mousse-bag/airbag type back protector. This protection has
been certified in the laboratory in accordance with the
requirements of the test criteria:
- CE - SP-001 02/2016
- EN - Fpr EN 1651-2018
- LTF - 2. DV LuftGerPV §1, Nr. 7C
On delivery, your back protection complies with all these
criteria. The best protection is offered when it is fully inflated.
Back protection can also be subject to more insidious attacks,
such as repeated rubbing (on the ground before take-off or on
landing), or UV attacks.
Improper positioning of the scoops may cause an incomplete inflation Improper positioning of the scoops may cause an incomplete inflation
of the back airbag, which may cause it to malfunction in the event of of the back airbag, which may cause it to malfunction in the event of
an impact
an impact
Airbag operation and use :
The airbag consists of 2 inflation chambers, one high and one
low. In flight, with the help of the relative wind, the air enters
the lateral and frontal scoops and fills the lower chamber.
When the lower chamber is full, the air enters the upper
chamber and fills it in turn.
The 2 scoops are equipped with a zipper, allowing them to be
protected during storage in the bag. Be careful to put them
back in place before each take-off.
47
KOLIBRI EVO
Preparing your harness
Back Protection
Avoid contact of the airbag cover with sharp or pointed objects that Avoid contact of the airbag cover with sharp or pointed objects that
could damage the cover.
could damage the cover.
It is imperative that the airbag closure zips are properly locked. It is imperative that the airbag closure zips are properly locked.
Otherwise it would be impossible for the airbag to remain under Otherwise it would be impossible for the airbag to remain under
pressure and perform its protective function.
pressure and perform its protective function.