Kortel Design KOLIBRI EVO, User Manual

Page: 46 / 95

4. Place the reserve, and the rest of the risers, in the
container. Position the reserve so that the connection with the
handle is down and as close as possible to the location of the
handle (see image).
5. Using a rod, close the mobile shutters as shown in the
diagram. (Step 1)
6. Insert the 2 needles from the handle through the 2 loops in
order to lock the mobile flaps. (Step 2) CAREFUL: only 1 needle
per loop!
7. Insert the 2 needles from the container, through the 2 holes
provided on the reserve handle. (Step 3)
8. Insert the 2 needles in the sheath located on the side of the
container. (Step 4)
Reserve handle
Reserve parachute
Closing needles
Sheath
Mobile flaps
1
2
Step 1
46
1
2
3
4
55
KOLIBRI EVO
5
3
Step 2
Step 3
Step 4
Preparing your harness
Installation of the reserve parachute
At the end of assembly, it is imperative to check scrupulously that no At the end of assembly, it is imperative to check scrupulously that no
assembly tools are left in place (rod, hanger). This would make it
assembly tools are left in place (rod, hanger). This would make it
impossible to extract the parachute if necessary. impossible to extract the parachute if necessary.
More detailed information is available at More detailed information is available at www.korteldesign.com www.korteldesign.com