Korg TouchView Trinity, Effect Manual, Page: 80 / 160

23: St. Bi-phase Mod.
(Stereo Bi-phase Modulation)
76
23: St. Bi-phase Mod.
(Stereo Bi-phase Modulation)
This stereo chorus effect adds two different LFOs together. You can set the Frequency and Depth parame-
ters for each LFO individually. Depending on the setting of these LFOs, very complex waveforms will
create an analog-type, unstable modulated sound.
a
LFO1 Waveform Triangle, Sine Selects LFO1 waveform.
LFO2 Waveform Triangle, Sine Selects LFO2 waveform.
b LFO Phase Sw 0 degree, 180 degree Switches the LFO phase difference between left and right.
c
LFO1 Frequency [Hz] 0.02…30.00Hz LFO1 speed
Src None…Tempo Modulation source of LFO1&2 speed
Amt –30.00…+30.00 Modulation amount of LFO1 speed
d
LFO2 Frequency [Hz] 0.02…30.00Hz LFO2 speed
Amt –30.00…+30.00 Modulation amount of LFO2 speed
e
Depth1 0…100 Depth of LFO1 modulation
Src None…Tempo Modulation source of LFO1&2 modulation depth
Amt –100…+100 Modulation amount of LFO1 modulation depth
f
Depth2 0…100 Depth of LFO2 modulation
Amt –100…+100 Modulation amount of LFO2 modulation depth
g L Pre Delay [msec] 0.0…50.0msec Left channel delay time
☞
P.65
h R Pre Delay [msec] 0.0…50.0msec Right channel delay time
☞
P.65
i
Feedback –100…+100 Feedback amount
☞
P.30
High Damp [%] 0…100% High range damping amount
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet Sets the balance between the effect and dry sounds.
☞
P.25
Src None…Tempo Modulation source of effect balance.
Amt –100…+100 Modulation amount of effect balance
Chorus/Flanger
Left
Right
Feedback
180 [degree]
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
LFO1: Tri / Sine
LFO2: Tri / Sine
Chorus/Flanger
High Damp