Korg TouchView Trinity, Effect Manual, Page: 136 / 160

11: 2Band Pitch Shifter
132
11: 2Band Pitch Shifter
This pitch shifter sets an individual shift amount for the high and low input signal ranges. If you apply a
detune effect to the high range of a string sound, and add the lower octave to the low range, a large
ensemble sound is produced.
a Mode Slow, Medium, Fast Switches pitch shifter mode.
☞
P.96
b
Low Pitch [1/2tone] –24…+24
Sets pitch shift amount for the low range in steps of a
semitone.
☞
P.97
Src None…Tempo Modulation source of pitch shift amount
Amt –24…+24 Modulation amount of pitch shift amount for the low range
c
Low Fine [cent] –100…+100cent
Sets pitch shift amount for the low range in steps of one
cent.
☞
P.97
Amt –100…+100cent Modulation amount of pitch shift amount for the low range
d Low High Damp [%] 0…100% High component damping amount in the low range
e
High Pitch [1/2tone] –24…+24
Sets pitch shift amount for the high range in steps of a
semitone.
☞
P.97
Amt –24…+24
Modulation amount of pitch shift amount for the high
range
f
High Fine [cent] –100…+100cent
Sets pitch shift amount for the low range in steps of one
cent.
☞
P.97
Amt –100…+100cent
Modulation amount of pitch shift amount for the high
range
g High High Damp [%] 0…100% High component damping amount in the high range
h
High/Low Split Point 1…100 Splits frequencies between low and high ranges
High/Low Balance Low, 1:99…99:1, High Output balance between low and high ranges
i Spread –100…+100
Sets the width of the stereo image of the effect sound.
☞
P.132
j
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
i: Spread
This parameter specifies the width of the stereo image of the effect sound. With
a value of +100, the low range signal is output from the left channel and the high
range signal from the right channel. With a value of 0, both channels will output
a mix signal of low and high-range signals. With a negative value, the output
channel of the low and high-range signals will be reversed.
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
High Damp
High Damp
+
Pitch Shifter
Pitch Shifter
Spread
High/Low Split Point
High/Low
Balance