manualshive.com logo in svg

Korg TouchView Trinity, Effect Manual, Page: 46 / 160

Share
Download
Korg TouchView Trinity Effect Manual Download Page 46

24: Tremolo

42

24: Tremolo

This effect modulates the volume level of the input signal.

a

LFO Waveform

Triangle, Sine, Square, Up, 
Down

Selects LFO Waveform. 

☞

P.42

b

LFO Shape

–100…+100

Determines how much the shape of LFO waveform is 
changed. 

☞

P.32

c

LFO Frequency [Hz]

0.02…20.00Hz

LFO speed

Src

None…Tempo

Modulation source of LFO speed

Amt

–20.00…+20.00Hz

Modulation amount of LFO speed

d

Depth

0…100

Depth of LFO modulation

Src

None…Tempo

Modulation source of the depth of modulation

Amt

–100…+100

Modulation amount of the depth of modulation

e

Wet/Dry

Dry, 1:99…99:1, Wet

Sets the balance between the effect and dry sounds.

Src

None…Tempo

Modulation source of effect balance

Amt

–100…+100

Modulation amount of effect balance

a: LFO Waveform

This parameter selects the LFO waveform.

Square wave simulates the characteristics of the tremolo created on a guitar 
amplifier. Combining this effect with the Amp Simulation will make a realistic, 
vintage tremolo amplifier sound.

Tremolo

In

Wet / Dry

Mono In - Mono Out

LFO: Tri/Sin/Sqr/Up/Down

LFO Shape

Tremolo - LFO Waveform

Triangle

Sine

Square

Up

Down

Summary of Contents for TouchView Trinity

































































































































































Reviews:

No comments