- 35 -
Configuration Guide
Use the dial to select a file on the FILE SELECT page.
Select “No Assign” if you do not want to specify a file.
Use the [PLAY]/[STOP] function button to preview or stop playback of the cur-
rently selected WAV file.
When a file on the internal drive is selected, you can press the [EXPORT] and
[DELETE] function buttons to store the currently selected file to a USB flash drive,
or to delete it from the internal drive.
Press the ENTER button to confirm your selection of the WAV file.
Note:
When deleting a file, if the WAV file you selected has already been set as a
WAV file for playback, “Already assigned” will be displayed and you will
not be able to delete the file. To delete the file, change the file settings and
then delete it.
• Attenuate .................................................................................................................. Off, On
Sets whether the playback level of WAV files on a USB flash drive will be attenuated.
On:
When playing the drum kit while playing back WAV files containing music and so
on, set the WAV file playback volume to “On” (attenuation enabled) to achieve the
appropriate volume.
Off:
When saving files in internal memory that were recorded using the training func
-
tion of this instrument (Internal Rec File) to a USB flash drive and playing the files back
from the flash drive, set this to “Off” (attenuation disabled).
Note:
When this parameter is set to “Off”, the playback level will remain the same and
will not fade out. For this reason, WAV files recorded using other devices may
sound distorted, depending on the file.
• Speed .................................................................................................................50%...200%
Sets the playback speed of the training file.
• Level ....................................................................................................... 0...100(Unity)...200
Sets the volume level of the training file.
• Backing Rec ................................................................................................................ Off, On
When you want to play in training mode to a backing sound (via the AUX-IN jack, USB
audio, a song playback sound or the sound of the metronome), this sets whether the
backing sound is also recorded.
6. Press the [ENTRY] function button on the “SETUP” page.
Confirms what you have edited, and returns to the TRAINING page.
Press the EXIT button to cancel the various settings and return to the TRAINING page.