- 28 -
Configuration Guide
[SONG] Song function
Two WAV file tracks (a
music track
and a
click track
) can be played in sync on this module
from a USB flash drive.
The combination of output levels for music and click tracks is called a
song project
. Song
projects are managed in the song project list.
Registering a WAV file in a song project
To use a song, connect a commercially available USB flash drive to the TO MEMORY DRIVE
port.
Tip:
The warning, “Please connect your USB Drive” will display if a USB flash drive is not
inserted.
1. Connect a USB flash drive that contains WAV files, into the TO MEMORY DRIVE port.
Use your computer to save WAV files to a commercially available USB flash drive.
You must format commercially available USB flash drives on this module before using
Tip:
WAV files to be used in song projects must be located in the root directory of the
USB flash drive.
Tip:
The specs for files that can be loaded into the e/MERGE are as follows:
· WAV files (PCM format)
· Sampling frequency: 44.1 kHz
· Bit length: 16 bits
· Maximum 4 hours (stereo/mono)
2. Press the [SONG] function button shown on the top page to display the SONG menu.