Korg Pearl e/MERG MDL1, Owner'S Manual, Page: 23 / 79

- 23 -
Configuration Guide
• Sound ........................................................................................... (all 10 sounds)
Sets the metronome sound. (
→
p.74 “Metronome sound list”).
• Level .......................................................................................0...100(unity)...200
Sets the metronome volume level.
• [TAP] function button
Use these settings to set the tempo at the interval with which you push the [TAP] func-
tion button, regardless of whether the metronome is on or off.
• [STORE] function button
Press the [STORE] function button to confirm the changes you made to the parameters
of the project.
• [LIST] function button
Switches between the metronome project selection and edit screens.
(
→
p.24 “Selecting a metronome project”)
3. Press the ENTER button to move to the value.
Turn the dial to change the value. Press the ENTER button to confirm your change.
To stop editing and revert to the previous settings, press the EXIT button.
However, when the power is turned off, the default settings will be restored.
Storing a metronome project
1. Press the [STORE] function button on the “ METRONOME ” menu.
2. Use the dial to select the store destination.
• Dest. ......................................................................................................... 01...50
Using the dial, select the number of the metronome project to which you want to store.
• Name ...................................................................................................................
The name of the currently selected metronome project will be displayed. Press the [RE-
NAME] function button to change the metronome project name. (
→
p.16 "Renaming")
3. Press the ENTER button to store.
Press the EXIT button at this time if you want to cancel storing.