Korg microKORG XL+ Owner'S Manual Download Page 76

Page: 76 / 103

microKORG XL+

LFO SHAPE ..........................................................................[–63…+63]



p. 66 “LFO.SHAPE”

KEY SYNC (LFO KeySync) ............................................................ [OFF, ON]

Specifies whether the LFO will be reset by note-on.



p. 67 “KEY SYNC (LFO KeySync)”

INI.PHASE (LFO Init Phase) ...................................................[000…180°]

Sets the starting location of the waveform.

NOTE

This parameter will be displayed and can be set if “KEY SYNC” is ON.



p. 67 “INI.PHASE (LFO Init Phase)”

LFO.SPRD (LFO Spread) ................................................... [–180…+180°]

Sets the LFO phase difference between the left and right channels.

14. PHASER (Stereo Phaser)

Left

Right

Resonance

LFO Shape

LFO Spread

LFO

Dry / Wet

High Damp

Stereo In - Stereo Out

Phaser

This effect creates a swell by shifting the phase. You can add spread to the
sound by offsetting the phase of the left and right LFOs from each other.

DRY/WET ......................................................["DRY", 99:1…1:99, "WET"]

Sets the balance between the effect and dry sounds.

TYPE..................................................................................[BLUE, U_VB]

Selects the phaser type.

MANUAL

..........................................................................[000…127]

Sets the frequency to which the effect is applied.

MOD.DEPTH (Modulation Depth)

...................................... [000…127]

Sets the depth of LFO modulation.

RESO (Resonance)

........................................................... [000…127]

Sets the resonance amount.

PHASE.......................................................................................... [+, –]

Switches the phase of the output and feedback.

LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]

Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.



p. 66 “LFO SYNC (LFO Tempo Sync)”

LFO FREQ (LFO Frequency)

......................................... [0.01…100.0Hz]

Sets the LFO speed.



p. 66 “LFO FREQ (LFO Frequency)”

SYNC.NOTE (LFO Sync Note)

.............................................. [8/1…1/64]

Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.

NOTE

This parameter will be displayed and can be set if “LFO SYNC” is ON.



p. 66 “SYNC.NOTE (LFO Sync Note)”

LFO WAVE (LFO Waveform)................ [SAW, SQUARE, TRIANGLE, SINE, S&H]

Selects the LFO waveform.



p. 66 “LFO WAVE (LFO Waveform)”

LFO.SHAPE ......................................................................... [–63…+63]



p. 66 “LFO.SHAPE”

KEY SYNC (LFO KeySync).............................................................[OFF, ON]

Specifies whether the LFO will be reset by note-on.



p. 67 “KEY SYNC (LFO KeySync)”

INI.PHASE (LFO Init Phase) .................................................. [000…180°]

Sets the starting location of the waveform.

NOTE

This parameter will be displayed and can be set if “KEY SYNC” is ON.



p. 67 “INI.PHASE (LFO Init Phase)”

Summary of Contents for microKORG XL+








































































































Search results

Summary of Contents for microKORG XL+

Reviews:

Related manuals for microKORG XL+

Brands by name

Popular brands

Korg microKORG XL+, Owner'S Manual

Search results

Summary of Contents for microKORG XL+

Reviews:

Related manuals for microKORG XL+

Brands by name

Popular brands