Korg Karma, Basic Manual

Page: 41 / 118

35
Quick Star
t
Simple combination editing
Listening to the program sound of just one timbre
●
Press the [F8] (“UTILITY”) key to access the utility
menu, and press the [F7] key to choose
“Solo
Selected Timbre.” Press the [F8] (“OK”) key.
Now you will hear only the program sound of the
currently selected timbre. The lower part of the LCD
screen will indicate [
Solo
].
To cancel this setting, choose “ Solo Selected Tim-
bre ” once again and press the [F8] (“OK”) key.
Adjusting the stereo location of the sound
5 Select the Mixer page.
Press the [F3] (“Mix”) key. Here you can adjust the
pan and volume for timbres 1–8.
6 Adjust the stereo location in “Pan” of timbre 2.
Use the cursor key [ ], [ ], [ ], [ ] to choose
“Pan” (highlighted) for timbre 2.
Use the controller to change the value.
A setting of C064 is center, L001 is far left, and R127
is far right. With a setting of RND , the stereo loca-
tion will change randomly between left and right
each time a note is played.
Adjusting the volume
7 Adjust the “Volume” of timbre 2.
Use the cursor key [ ], [ ], [ ], [ ] to choose “ Vol-
ume ” (highlighted) for timbre 2.
Use the [VALUE] controller to change the value.
Adjusting the volume while preserving the volume
balance between timbres
●
Press the [F8] (“UTILITY”) key to access the utility
menu, and press the [F7] key to choose “
Hold Bal-
ance .” Press the [F8] (“OK”) key.
The upper right of the LCD screen will indicate
“Hold Bal.”
When you change the “
Volume
” value of any tim-
bre, the volume of all timbres will also change to
preserve the volume balance at the time you
checked the Hold Balance setting.
To cancel this setting, choose “
Hold Balance ” once
again and press the [F8] (“OK”) key.