manualshive.com logo in svg

Korg Karma, Basic Manual

The Motorola Karma is a stylish and feature-packed handset, offering a seamless mobile experience. With its sleek design and intuitive interface, this device ensures effortless navigation and usage. Enhance your experience by downloading the user manual for free from our website, providing you the necessary guidance for optimal use.

Share
Download
background image

 

ii

 

To ensure long, trouble-free operation, 
please read this manual carefully.

 

Precautions

 

Location

 

Using the unit in the following locations can result 
in a malfunction.
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration

 

Power supply 

 

Please connect the designated AC/AC power sup-
ply to an AC outlet of the correct voltage. Do not 
connect it to an AC outlet of voltage other than that 
for which your unit is intended.

 

Interference with other electrical devices

 

This product contains a microcomputer. Radios and 
televisions placed nearby may experience reception 
interference. Operate this unit at a suitable distance 
from radios and televisions.

 

Handling

 

To avoid breakage, do not apply excessive force to 
the switches or controls.

 

Care

 

If the exterior becomes dirty, wipe it with a clean, 
dry cloth. Do not use liquid cleaners such as ben-
zene or thinner, or cleaning compounds or flamma-
ble polishes.

 

Keep this manual

 

After reading this manual, please keep it for later 
reference.

 

Keeping foreign matter out of your equipment

 

• Never set any container with liquid in it near 

this equipment. If liquid gets into the 
equipment, it could cause a breakdown, fire, or 
electrical shock.

• Be careful not to let metal objects get into the 

equipment. If something does slip into the 
equipment, unplug the AC/AC power supply 
from the wall outlet. Then contact your nearest 
Korg dealer or the store where the equipment 
was purchased.

 

Data handling

 

Malfunctions due to incorrect operation may cause the 
contents of memory to be lost, so we recommend that 
you save important data on a floppy disk. Please be 
aware that Korg will accept no responsibility for any 
damages which may result from loss of data.

 

* KARMA™ (Kay Algorithmic Realtime Music Architecture) Tech-

nology has been licensed from Stephen Kay, and is protected 
by U.S. Patents 5,486,647, 6,084,171, 6,087,578, 6,103,964, 
6,121,532, and 6,121,533. Other patents pending.  

* KARMA™, the KARMA Logo, Generated Effect™ (GE), 

Melodic Repeat™, Direct Index™, Manual Advance™, and 
SmartScan™ are trademarks of Stephen Kay, Karma Lab LLC, 
www.karma-lab.com.  This manual copyright © 2000-2001 by 
KORG Inc. and Stephen Kay. All rights reserved.

* Company names, product names, and names of formats etc. 

are the trademarks or registered trademarks of their respective 
owners.

 

THE FCC REGULATION WARNING (for U.S.A.)

 

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for 

help.

Unauthorized changes or modification to this system can void 
the user’s authority to operate this equipment.

 

CE mark for European Harmonized Standards

 

CE mark which is attached to our company’s products of AC 
mains operated apparatus until December 31, 1996 means it 
conforms to EMC Directive (89/336/EEC) and CE mark Directive 
(93/68/EEC). And, CE mark which is attached after January 1, 
1997 means it conforms to EMC Directive (89/336/EEC), CE 
mark Directive (93/68/EEC) and Low Voltage Directive (73/23/
EEC).
Also, CE mark which is attached to our company’s products of 
Battery operated apparatus means it conforms to EMC Directive 
(89/336/EEC) and CE mark Directive (93/68/EEC).

Summary of Contents for Karma























































































































Reviews:

No comments

Related manuals for Karma

M-Audio Keystation Mini 32 User Manual preview
Keystation Mini 32
Brand: M-Audio Pages: 45
M-Audio KEYRIG 25 User Manual preview
KEYRIG 25
Brand: M-Audio Pages: 27
M-Audio PROKEYS SONO 61 User Manual preview
PROKEYS SONO 61
Brand: M-Audio Pages: 49
M-Audio Ozonic User Manual preview
Ozonic
Brand: M-Audio Pages: 38
M-Audio Oxygen 61 Quick Start Manual preview
Oxygen 61
Brand: M-Audio Pages: 44
InnoCigs JustFog P16A Clearomizer User Manual preview
JustFog P16A Clearomizer
Brand: InnoCigs Pages: 2
Misfit SHINE Quick Start Manual preview
SHINE
Brand: Misfit Pages: 83
D-MAX DCK-500B User Manual preview
DCK-500B
Brand: D-MAX Pages: 47
Bakker Elkhuizen S-board 840 User Manual preview
S-board 840
Brand: Bakker Elkhuizen Pages: 4
Trust KB-2800 Quick Manual preview
KB-2800
Brand: Trust Pages: 2
Trust 15906 User Manual preview
15906
Brand: Trust Pages: 47
CAVE K10 Quick Setup Manual preview
K10
Brand: CAVE Pages: 4
Jaybird Aquafog GT-500 User'S Manual And Operating Instructions preview
Aquafog GT-500
Brand: Jaybird Pages: 18
Peavey DPM 3SE User Manual preview
DPM 3SE
Brand: Peavey Pages: 161
ViewSonic KBM-KU-201 - ViewMate Slim Wired Keyboard User Manual preview
KBM-KU-201 - ViewMate Slim Wired Keyboard
Brand: ViewSonic Pages: 11
Mercedes-Benz Car receiver Operation Manual preview
Car receiver
Brand: Mercedes-Benz Pages: 15
Deep Blue Basic Installation And Operating Instructions Manual preview
Basic
Brand: Deep Blue Pages: 52
iClever IC-GK01 User Manual preview
IC-GK01
Brand: iClever Pages: 7

Brands by name

Popular brands

Load more brands