manualshive.com logo in svg

Korg Karma, Basic Manual, Page: 9 / 118

Share
Download
Korg Karma Basic Manual Download Page 9

3

Introduction

Over

view of the modes

Overview of the modes

In addition to its KARMA function, this instrument 
includes an extremely wide array of functionality. You 
can play and edit programs and combinations, record 
and play sequence data, directly play SMF files from 
floppy disk, and manage disk data. These functions are 
broadly divided into “modes.” KARMA Music Work-
station has six modes.

Program mode

• Here you can select and play programs

You can choose programs from rewritable banks A, 
B, C, D, E and F which contain a total of 768 pro-
grams, and non-rewritable bank G (256 programs 
compatible with the GM2 standard, and nine drum 
programs).
(The 128 programs of bank F can be selected only if 
the EXB-MOSS option has been installed.)

• A program can use one KARMA module.
• You can edit

 

a program

Make settings for the oscillator, filter, amp, EG, LFO, 
effects, and KARMA function etc.

Select a multisample (the following multisamples 
are available)

• 425 internal multisamples (ROM)

• Expanded multisamples (when a separately 

sold EXB-PCM series board is installed)

• Create drum programs using a drum kit 

(created in Global mode)

Combination mode

• Here you can select and play combinations

A combination is a set of two or more programs (a 
maximum of eight), and allows you to produce com-
plex sounds that could not be created by an individ-
ual program.
You can choose combinations from rewritable banks 
A, B, C, D, E and F which contain a total of 768 com-
binations.

• A combination can use up to four KARMA 

modules.

• You can edit combination data.

Make settings for volume, pan, layer/split etc. for 
each timbre (program), and make settings for effects 
and the KARMA function etc.

Sequencer mode

• Here you can use the 16-track sequencer to record 

and playback songs.

• A song can use up to four KARMA modules.
• You can make effect settings for your song.

OSC 1

Multisample - H

Drum Kit 

Multisample - L 

PITCH1 FILTER1

AMP1

OSC 2

Multisample - L 

PITCH2 FILTER2

AMP2

Multisample - H

PROGRAM MODE

IFX 1

IFX 2

IFX 3

IFX 4

IFX 5

MFX 1

MFX 2

MEQ

TRACK 1

TRACK 8

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

Insert /Master Effect

KARMA Module [A]

SEQUENCER / SONG PLAY MODE

TRACK 9

TRACK 16

TRACK 10

TRACK 11

TRACK 12

TRACK 13

TRACK 14

TRACK 15

Program

TIMBRE 1

TIMBRE 8

TIMBRE 2

TIMBRE 3

TIMBRE 4

TIMBRE 5

TIMBRE 6

TIMBRE 7

Program

Program

Program

Program

Program

Program

Program

COMBINATION MODE

Key
Assign

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

Program

GLOBAL MODE

DRUM KIT

Drumsample / Sample - L

 Drumsample / Sample - H

KARMA Module [B]

KARMA Module [C]

KARMA Module [D]

KARMA

IFX 1

IFX 2

IFX 3

IFX 4

IFX 5

MFX 1

MFX 2

MEQ

Insert /Master Effect

KARMA Module [A]

KARMA Module [B]

KARMA Module [C]

KARMA Module [D]

KARMA

IFX 1

IFX 2

IFX 3

IFX 4

IFX 5

MFX 1

MFX 2

MEQ

Insert /Master Effect

KARMA Module [A]

KARMA

DISK MODE

Key
Assign

GLOBAL SETTING

 

Summary of Contents for Karma























































































































Reviews:

No comments