Korg EC350, User Manual, Page: 23 / 230

Basic functions 21
Soft pedal. The sound will be softer and more mellow while you press the pedal.
The depth at which you press the pedal will adjust the softness of the sound (half-
pedal effect).
Damper pedal settings for Layer.
In Layer mode, you can select the sound(s) to
which the damper pedal will be applied.
1
Hold the TRANSPOSE/FUNCTION button, and press the damper pedal. Each time
you press the pedal, the LED on the sound selection button(s) where the damper
pedal is active will light.
2
When the pedal is assigned to the desired sound(s), release the TRANSPOSE/
FUNCTION button.
The metronome
The EC350 incorporates a metronome, with which you can set the tempo during
practice.
Note: When the instrument is turned on, the following metronome parameters are
automatically reset to their default status.
Starting and stopping the metronome. Press the METRONOME button to
make the metronome start or stop. When turning on, the metronome is set according
to the slider position, but you can adjust it with the procedure described below. After
having listened to the demo, the tempo will be that of the last demo that had been
listened to.
Adjusting the metronome volume. While the metronome is playing, keep the
METRONOME button pressed and repeatedly press the STRINGS/PAD button (or
the B5 key) to lower the volume, or the CHOIR button (or the C6 key) to raise it. To
reset the volume, simultaneously press the STRINGS/PAD and CHOIR buttons (or
the B5 and C6 keys on the keyboard) while holding the METRONOME button.
Adjusting the tempo using the TEMPO slider.
Use the TEMPO slider to adjust
the tempo. The range is = 40 ~ 200.
Key Effect Key Effect
B5 Lower volume C6 Higher volume
MEM MEM