Korg EC350, User Manual, Page: 17 / 230

Before you begin 15
nected to an external amplification system, and do not want to hear the sound com-
ing from the internal speakers.
Turning the instrument on
Insert the DC plug of the supplied AC adapter into the
DC inlet of the EC350, and connect the AC plug to a
wall socket; then press the POWER switch. When the
instrument is on, the LEDs on the control panel will
light up. To turn the instrument off, press the POWER
switch again.
Note: When the instrument is turned off, most parameters are memorized. Which of
them is detailed in the relevant sections, and the mark appears next to the sec-
tion’s header. A list of memorized and non-memorized data can be seen on page 52.
Adjusting the volume
Move the MASTER VOLUME slider towards the right to increase the volume;
towards the left to decrease the volume. The maximum is “10”; the minimum
(silence) is “0”. This control adjusts the output level of the headphones, the internal
speakers and of the OUTPUTs. It does not control the input level of the audio
source connected to the INPUTs.
Note: It is always better to start with a low volume and then increase gradually.
Listening to the Demo
The EC350 contains 30 pre-recorded demo songs. Listen to them to experience the
rich sound and expressive potential of this instrument.
Listen to all songs at once. You can listen to all demo songs with a single com-
mand.
1
Press the DEMO button (or keep the TRANSPOSE/FUNCTION button pressed,
and press E1 on the keyboard). The sound selection buttons LED will blink sequen-
tially from left to right. After a few seconds, playback will begin. All demo songs
will be played back. After the last song, the playback will begin again from the first
song.
2
During playback, you can press a sound selection button to repeat just the current
bank of ten demo songs. (There are three banks of ten demo songs each: 1-10, 11-
20, 21-30).
For example, if you press the CHOIR button while song number 1 is playing, song
DC IN
to an AC outlet
MEM MEM