Port Based: The port priority will follow the queue priority that you have assigned.
The default priority type is
CoS Only
. The system will provide a default CoS-Queue table that
4.5.2
rea is where the user can set CoS values to the Physical Queue mapping table. Since
follow
values.
ou will find that the CoS values 1 and 2 are mapped to physical Queue 0 (lowest queue).
highest physical queue).
fter configuring, press
Apply
to enable the setting
4.5.3 DSCP-Queue
Mapping
his is where users can change DSCP
alues to a Physical Queue mapping table.
ince the switch fabric of the
JetNet 3706 /
etNet 3706f
supports 4 physical queues,
owest, low, middle and high), users should
ssign a DSCP value to the level of the
hysical queue. With the
JetNet 3706 /
etNet 3706f
users can easily change the
apping table to follow the upper layer 3
fter configuring, press
Apply
to enable the
you can refer to for the next command.
After configuring, press
Apply
to enable the settings.
CoS-Queue
Mapping
This a
the switch fabric of
JetNet 3706 / JetNet3706f
supports 4 physical queues (Lowest, Low,
Middle and High), users should assign CoS value to the level of the physical queue.
With the
JetNet 3706 / JetNet 3706f
users can easily assign the mapping table or
suggestions from the 802.1p standard.
Korenix
uses 802.p standards for its default
Y
CoS values 0 and 3 are mapped to physical Queue 1, (low/normal physical queue), CoS
values 4 and 5 are mapped to physical Queue 2 (middle physical queue), and CoS values 6
and 7 are mapped to physical Queue 3 (
A
s.
T
v
S
J
(l
a
p
J
m
switch or routers’ DSCP setting.
A
settings.
JetNet 3706/JetNet 3706f Industrial Web Managed PoE Plus Switch
34
