Technical Tips:
If both ends are going at different speeds, they will not link to each other. If
both ends are in different duplex modes, they will be connected by half mode.
4.2.2 Port
Status
Port Status shows you the current port status.
A description of each column is as follows:
Port
: Port interface number.
Type
: 100BASE -> Fast Ethernet port.
Link
: Link status. Up -> Link UP. Down -> Link Down.
State
: Enable -> State is enabled. Disable -> The port is disable by user configured.
Speed/Duplex
: Current working status of the port.
Flow Control
: The state of the flow control.
4.3 Power over Ethernet
Power over Ethernet is one of the key features of
JetNet 3706/ JetNet 3706f
. It is in
compliances with IEEE 802.3af standards and supports 30w High power forwarding capability.
JetNet 3706/JetNet 3706f
adopts 4-Port PoE injectors in port 1 to port 4, each port with the
ability to deliver a 0.615mA current.
The following commands are included in this section:
4.3.1 PoE Control
4.3.2 PoE Scheduling
4.3.3 PoE Status
4.3.1 PoE
Control
You can pull down the
PoE
state
column to enable/disable ports, or set it to scheduling control
mode.
The Power Mode provides
Standard
mode for IEEE 802.3af PD,
Manual
mode for user
configuration of the power limit to IEEE 802.3af standard PD, or Ultra mode for user
configuration to perform at the 30w power limitation.
JetNet 3706/JetNet 3706f Industrial Web Managed PoE Plus Switch
23
