PD Pin out
Conductor
Mode A
Mode B
1
Positive Vport, Negative Vport
2
Positive Vport, Negative Vport
3
Negative Vport, Positive Vport
4
Positive Vport, Negative Vport
5
Positive Vport, Negative Vport
6
Negative Vport,Positive Vport
7
Negative Vport, Positive Vport
8
Negative Vport,Positive Vport
Notes Before installing the Powered Device (PD); please ensure that the PD pin assignment
follows IEEE802.3af PD standards. There are some IEEE802.3af pre-standards stating that the
PD can only accept mode A for power. In the IEEE802.3af standards, it indicates that the PD
could be powered by either Mode A or Mode B.
2.7 DIN-Rail Mounting Installation
There are 2 DIN-Rail Clips in each unit box. Each set of DIN Rail clips include 4 screws and 2
clips. If the DIN-Rail set is missing, please contact a Korenix distributor for help.
Use the screws to attach the DIN-Rail clip
to the wall-mount plate included
Wall Mount Installation
Follow the steps below to install
JetNet 3706/3706f
with its included wall mount plate.
Use the hook holes at the corners of the wall mount
plate to hang
JetNet 3706/3706f
on the wall.
Wall Mount plate and screws.
JetNet 3706/JetNet 3706f Industrial Web Managed PoE Plus Switch
8
