manualshive.com logo in svg

Korenix JetNet 3706, User Manual

Share
Download
Korenix JetNet 3706 User Manual Download Page 20

 

  51  (GMT+06:00) Astana, Dhaka 
  52  (GMT+06:00) Sri Jayawardenepura 
  53  (GMT+06:30) Rangoon 
  54  (GMT+07:00) Bangkok, Hanoi, Jakarta 
  55  (GMT+07:00) Krasnoyarsk 
    56    (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi 
  57  (GMT+08:00) Irkutsk, Ulaan Bataar 
  58  (GMT+08:00) Kuala Lumpur, Singapore 
  59  (GMT+08:00) Perth 
  60  (GMT+08:00) Taipei 
  61  (GMT+09:00) Osaka, Sapporo, Tokyo 
  62  (GMT+09:00) Seoul 
  63  (GMT+09:00) Yakutsk 
  64  (GMT+09:30) Adelaide 
  65  (GMT+09:30) Darwin 
  66  (GMT+10:00) Brisbane 
  67  (GMT+10:00) Canberra, Melbourne, Sydney 
  68  (GMT+10:00) Guam, Port Moresby 
  69  (GMT+10:00) Hobart 
  70  (GMT+10:00) Vladivostok 
  71  (GMT+11:00) Magadan, Solomon Is., New Caledonia 
  72  (GMT+12:00) Aukland, Wellington 
  73  (GMT+12:00) Fiji, Kamchatka, Marshall Is. 
  74  (GMT+13:00) Nuku'alofa 
 

Daylight Saving Time:

 Set when Enable Daylight Saving Time start and end, During the 

Daylight Saving Time, the device’s time is one hour earlier than the actual time. 

 

Once you have finished the configuration, click 

Apply

 to apply your configuration. 

 

4.1.5 Backup 

and 

Restore 

With the Backup command, you can save current configuration files saved in the switch’s flash 
to the admin PC or TFTP server. This will allow you to go to the 

Restore 

command later, in 

order to restore the configuration file back to the switch. Before you restore the configuration 
file, you must place the backup configuration file into the PC or TFTP server. The switch will 
then download this file back to the flash. 

 

There are 2 modes for users to backup/restore the configuration file, Local File mode and 
TFTP Server mode. 

Local File

 

mode

: In this mode, the switch acts as the file server. Users can browse the target 

folder and then type in the file name to backup the configuration. Users can also browse the 
target folder and select existing configuration files to restore the configuration back to the 
switch. 

TFTP Server

 

mode

: In this mode, the switch acts as TFTP client. Before you do so, make 

sure that your TFTP server is ready. Then type in the IP address of the TFTP Server and 
configuration file name. 

TFTP Server IP Address

: Key in the IP address of your TFTP Server here. 

JetNet 3706/JetNet 3706f Industrial Web Managed PoE Plus Switch   

16

Summary of Contents for JetNet 3706
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands