Installation
1.Install the mobile air conditioner in a flat
and spacious location where the air outlets
will not be obstructed.
2.A minimum clearance of 50cm from walls
or other obstacles should be kept.
Note:
1.The air conditioner shall not be
used in the laundry.
2.The plug shall be accessible after
the unit is positioned.
Accessories
Parts
Parts name
Quantity
Duct
Adaptor
Windows installation board
Alkaline batteries
Remote controller
1
1
2
1
The customer should have a qualified power supply coincident with that
printed on the tag of the air conditioner. Its voltage should be in the range
of 90%-110% of its rated voltage.
Must use special circuit and efficient grounding outlet matching with
the plug of the air conditioner.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
7
4
More than
50cm
1
Deal with water condensate
When the inside water tank is full, the water
full display is lighted.
1. Open the drain cover and extract it upwards.
2.put one container or drain cover under the drain
pipe, take off the plug on the drain pipe and let
out the condensing water.
3.after let out all the condensing water, put the
plug back onto the drainage outlet, then cover
the drain cover.
IMPORTANT:
This water is not suitable for
drinking.
Select a best location
Guide of customer
bolt
1
nut
1
Down drain outlet
M
or
e
th
an
5
0c
m
NOTE:
This remote control is the general type, so some functions such as SWING,
HEALTH,HUMIDITY,and FEELING are not avaiable for this unit.
