KORAVENT 100
90
Maintenance
Changing the filter
The filter must be changed when a lower output is ob
-
served. After 6 months of operation, the display will
show an indication of the necessity of changing the fil
-
ter –
L
.
Note:
You will find filters for different uses in “Accesso
-
ries” (on page 93).
Dismounting and mounting the filter
1.
Press the front panel in places shown by the two
upper marking arrows and pull it towards you (see
picture) .
2.
Get hold of the filter’s frame situated down on the
partition and take it out of its holder .
3.
Take the filter out of its frame and put in a new filter.
Notice:
The F5 filter is to be placed with its smooth sur
-
face oriented towards the partition of the holder.
4.
Push the frame of the filter back to its holder and clo
-
se the front panel until it gets into the arrest position.
5.
Press the – button for about 5 seconds, hold it un
-
til the indication of the necessity of changing the filter
(
L
) is not lit up any more .
Summary of Contents for KORAVENT 100
Page 23: ...N vod k pou it 23...
Page 47: ...N vod na pou itie 47...
Page 71: ...Bedienungsanleitung 71...
Page 95: ...Instruction manual 95...
