KORADO KORAVENT 100, Instruction Manual

Page: 87 / 96

Instruction manual
87
MULTILEVEL SENSOR
When the KORAVENT 100W detects presence of CO2, it sets the following levels of air power
output: >600 ppm = 2; >800 ppm = 3; >1000 ppm = 4; >1500 ppm = 5; >2000 ppm = 6;
>2500 ppm = max.
PROTECTION SET
0 = it is possible to control the KORAVENT 100W device locally .
2 = local control is blocked .
CONFIGURATION COMMAND CLASS
Operating time counter
Loading of operating time (CONFIGURATION_GET).
Parameter Number = 1
Configuration Value 1 = RUNTIME_H_MSB
Configuration Value 2 = RUNTIME_H_LSB
Configuration Value 3 = RUNTIME_L_MSB
Configuration Value 4 = RUNTIME_L_LSB
Duration of the timer
Setting the time duration of the operating timer for a delay release of 1-1080
1)
mins .
(CONFIGURATION_SET).
Loading the aeration duration time (CONFIGURATION_GET).
Parameter Number = 2
Configuration Value 1 = TIMER_VALUE_H_MSB
Configuration Value 2 = TIMER_VALUE_H_LSB
Remaining time interval of the delay release (it is possible to load only)
Loading the remaining time interval during operation with the timer on
3)
(CONFIGURATION_GET).
Parameter Number = 3
Configuration Value 1 = TIMER_REMAIN_H_MSB
Configuration Value 2 = TIMER_REMAIN_H_LSB
Operation mode with timer on
Setting the timer to start/stop and Timer repeat (repetition with the timer on)
2)
(CONFIGURATION_SET).
Loading the timer operation mode
3)
(CONFIGURATION_GET).
Parameter Number = 4
1) At values >1080 the timer will be set to 1080 minutes.
2) When Timer-Repeat is set to “enabled”, the timer will go off every 24 hours.
3) It is also possible to load the timer operation mode activated on the device
(current operation mode, remaining time interval of the delay release).
8 7 6 5 4 3 2 1
Timer Repeat Timer
0 = disabled; 1 = enabled 0 = stop; 1 = start