KORAVENT 100
82
Step 4:
Drilling the fixing holes and inserting fixing screws
1.
Placing the ventilation pipe from the outside:
place a partition layer on the bottom of the
chink (e.g. a round string) in order to avoid
unwanted adhesion.
2.
Sealing up the outer cover grid: apply sealing
matter (not enclosed in the package) around
the mouthpiece of the cover grid. The
mouthpiece is included in the package.
3.
Installation of the outer cover grid:
– Slats must be face down and they must be
in horizontal position .
– Insert the grid’s mouthpiece into the venti
-
lation pipe .
– Push the grid firmly against the wall in order
to ensure that silicone was distributed
evenly and sealed up the ventilation pipe .
těsnicí hmota
např. silikon
sealing matter
e.g. silicone
těsnicí hmota
např. silikon
Summary of Contents for KORAVENT 100
Page 23: ...N vod k pou it 23...
Page 47: ...N vod na pou itie 47...
Page 71: ...Bedienungsanleitung 71...
Page 95: ...Instruction manual 95...
