KORAVENT 100
84
Step 6:
Fixing and connecting the KORAVENT 100 device
1.
Put the fixing holes situated at the back side of the
device on the fixing screws and push the device down
-
wards.
2.
Check whether the device is seated firmly.
3.
Press the front panel in places shown by the two upper
marking arrows and pull it towards you (see picture).
Tip the front panel out until you start feeling perceptible
resistance .
4.
Get hold of the filter’s frame situated down on the
partition and take it out of its holder .
5.
Fold the insulation mat placed inside .
6.
Push the wad fully into the oblong hole.
7.
Assemble the device again, following the
instructions in the reverse order .
8.
Plug the European-norm AC power
cord to the AC 230 V mains wall socket.
Summary of Contents for KORAVENT 100
Page 23: ...N vod k pou it 23...
Page 47: ...N vod na pou itie 47...
Page 71: ...Bedienungsanleitung 71...
Page 95: ...Instruction manual 95...
