17
18
3. Harness Installation for Group I
1
2
Step 1: As shown in figure 1, pull out some top
tether strap.
Step 2: As shown in figure 2, rotate the car seat
to the 90 degree ((Please refer to P8 -The
Function of Rotation).
Step 6: As shown in figure 6, have your child sit
on the seat to ensure the lap belt restrict the
position of pelvis. Please check the shoulder
height, the shoulder belts are required to place
a little bit higher level of your child's shoulders.
Too high or too low may reduce the safety of
the children's restraining system.
Step 3: As shown in figure 3, press the central
adjuster and meanwhile, pull out the harness
strap to release shoulder belt.
Step 4: As shown in figure 4, press the red
button to open the harness buckle.
Step 5: As shown in figure 5, pull out both of
the shoulder belt to both sides of the seat.
3
5
6
4
Step 7: As shown in figure 7, pull harness adjustment strap outward to fix child and avoid harness
strap to constrict child too much. It is better to make adult palm can insert between harness strap
and child's chest. Make sure the tightness is comfortable for your child and ensure the lap belt
restrict the position of pelvis.
Methods to use harness buckle: guide the two buckle latches
together and engage them before putting them into the harness
buckle with a click nose. Pull the buckle latches to check whether
it is locked well. The buckle latches will be released if you press
the red button.
1
2
3
7
Level 1
Level 2
Step 8: As shown in figure 8, Children who less than 10kg should use Level 1, and children who
equal 10kg or over 10kg should use Level 2. Before adjustment, loosen five-point safety belt and
open buckle. Then twist the strap to go through a vertical slot and make sure buckle are fixed in
the slot.
1
2
3
8
9
Step 9: As shown in figure 9, pull the Headrest
setting handle upward to adjust the headrest
to the right position according to different
height of children.
Attention: after sitting, adjust the headrest to
the right position. In the forward facing
installation for Group I, shoulder pads should
higher a little bit. One or two fingers is the
best distance from the bottom of headrest to
child's shoulders.
Pull
Group I (9-18kg) Installation
(Forward facing placement)
Summary of Contents for LucaFix
Page 1: ......
