Step 4: remove the shoulder pads: As shown in figure 4, separate the shoulder belts with strap
yoke according to the figure 1-2-3-4. Then, put strap yoke into the rear cover storage slot and
draw out the belt forward. According to figure 5 and 6, open the shoulder pads, separate shoulder
belts with strap yokes, then draw out the shoulder pads.
Step 5: As shown in figure 5,
open harness buckle, put the
buckle pad and cushion aside.
1
4
5
6
2
3
5-Point Harness Removal
19
20
11
1
2
10
Step 10: As shown in figure 10, rotate car seat
to forward facing (Please refer to P8 -The
Function of Rotation).
Step 11: As shown in figure 11, open the Side
Protection in the side which is near the door
(Please refer to P8 - The Function of Side
Protection).
12
Step 12: As shown in figure 12, tighten the top tether until Top Tether Adjuster shows green.
Meanwhile, shake the car seat to check the top tether is tightened favorably and correctly.
If you want to release top tether, push the button to make top tether adjuster revolve some
angle.
Step 2: As shown in figure 2,
press the central adjuster and
loose the shoulder belt. Then,
adjust the headrest to the
suitable position.
Step 3: As shown in figure 3,
tighten the top tether and put
it in the headrest temporarily.
Then, open the rear cover.
Step 1: As shown in figure 1,
loose the top tether strap and
rotate the car seat to the 90
degree ((Please refer to
P8 -The Function of Rotation).
4
6
3
Group I (9-18kg) Installation
(Forward facing placement)
Summary of Contents for LucaFix
Page 1: ......
