background image

1

2

1. ISOFIX SEMI-UNIVERSAL 0+I (0-18KG): 

   TOP HARNESS

1. This is ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No.44,04

   series of amendments for general use in vehicles fitted with ISOFIX anchorages

   systems.

2. It will fit vehicles with positions approved as ISOFIX positions(as detailed in the

   vehicle handbook), depending on the category of the child seat and of the fixture.

3. The mass group and ISOFIX size class for which this device is intended is: 0+Igroup,

   0-18kg, ISOFIX D.

This Child restraint is classified for“(Semi-Universal)”use and is suitable for fixing into the

seat positions of the following cars: 

Seat positions in other cars may also be suitable to accept this child restraint. If in doubt,

consult either the child restraint manufacturer or the retailer.

?

(Apply to all vehicles with

ISOFIX anchroages)

Thank you for trust to our company and products!

For parents:

Welcome to use SisterBeBe baby car seats. Please read user manual carefully

before installing and using.

2. ISOFIX UNIVERSAL I (9-18KG): 

   TOP HARNESS

1. This is ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No.44,04 series of 

  amendments for general use in vehicles fitted with ISOFIX anchorages systems.

2. It will fit vehicles with positions approved as ISOFIX positions(as detailed in the vehicle 

  handbook), depending on the category of the child seat and of the fixture.

3. The mass group and ISOFIX size class for which this device is intended is: I group,

  9-18kg, ISOFIX B1.

4. UNIVERSAL II+III (15-36kg): 

   3-POINT BELT

3. SEMI-UNIVERSAL II+III (15-36kg): 

   3-POINT BELT

1.This is a“Universal”child restraint. It is approved to Regulation No.44, 04 series of

  amendments, for seneral use in vehicles and it will fit most, but not all, car seats.

2. A corrcet fit is likely if the vehicle manufacturer has declared in the vehicle handbook

  that the vehicle is capable of accepting a“Universal”child restraint for this age group.

3.This child restraont has been classified as“Universal”under more stringent conditions

  than those which applied to earlier designs which do not carry this notice.

4.If in doubt, consult either the child restraint manufacturer or the retailer. 

1.This is a“Universal”child restraint. It is approved to Regulation No.44, 04 series of

  amendments, for seneral use in vehicles and it will fit most, but not all, car seats.

2. A corrcet fit is likely if the vehicle manufacturer has declared in the vehicle handbook

  that the vehicle is capable of accepting a“Universal”child restraint for this age group.

3.This child restraont has been classified as“Universal”under more stringent conditions

  than those which applied to earlier designs which do not carry this notice.

4.If in doubt, consult either the child restraint manufacturer or the retailer. 

Only suitable for use in the listed vehicles fitted 3 point/with retractor safety-belts,

approved to ECE Regulation No.16.

Only suitable for use in the listed vehicles fitted 3 point/with retractor safety-belts,

approved to ECE Regulation No.16.

Only can apply to the vehicle that has ISOFIX anchroages and 3-point safety belts.

This Child restraint is classified for“(Semi-Universal)”use and is suitable for fixing into the

seat positions of the following cars: 

Seat positions in other cars may also be suitable to accept this child restraint. If in doubt,

consult either the child restraint manufacturer or the retailer.

?

(Apply to all vehicles with

ISOFIX anchroages)

Only can apply to the vehicle that has ISOFIX anchroages and 3-point safety belts.

The vehicle equipped with ISOFIX anchroages.

WARRING: Don’t use force-bearing points without marking!

WARRING: Don’t use forward facing before the child s weight exceeds 9kg!

The vehicle equipped with ISOFIX anchroages.

Summary of Contents for LucaFix















Reviews: