32
SETTING UP THE SCALE
The scale is a sensitive measuring device. For good measurement results
and to prevent damage to the scale, please follow the instructions:
• Position the scale on a flat and solid floor with a firm floor covering.
Carpet is not suited.
• Select a site where the scale is protected against impacts, moisture,
severe temperature fluctuations, heat sources and dust.
SWITCHING ON AND OFF
Step-On function
If you would like to weigh only the body weight, switch on the scale using
the Step-On function:
• Step on the measuring surfaces 1 of the
deactivated scale. After approx.
2 seconds, the scale is switched on showing the weight.
Switching on for the orher measurements
• Press the button surface SET 2. The scale is switched on. The menu
for the profile settings is shown (see “Setting the profile” on page 10).
Switching off automatically
The scale switches off automatically if there is no action for approx. 10
seconds (setting, weighing, displaying).
SELECTING THE UNITS OF MEASUREMENT
You can select the unit of measurement in which the scale displays the
weight. Simultaneously, the unit of measurement for the setting of the
body height is adjusted.
NOTES:
• In the delivery condition and after the battery change, the scale is set
to kilogrammes (kg) and centimetres (cm).
• With the batteries 8 inserted (with sufficient capacity) the setting re-
mains stored after the scale is switched off.
• The unit of measurement cannot be changed if a weight or measured
val- ues are already displayed.
1. Switch on the scale using the button surface SET 2 and wait until 0.0
kg (0.0 lb / 0: 0.0 st:lb) is displayed.
