background image

VII. Specific Model Data

Mounting

Kooltronic Air Conditioners have been engineered to be installed easily. To avoid damaging
your Air Conditioner, please read the following information before installation.

Panel-Mounted Air Conditioners are equipped with two vertical mounting rails.
These rails can be mounted to any available vertical surface on the enclosure.

Refer to page 8 for the location of all mounting holes and cutouts.

Make sure the cutouts don't interfere with components inside your cabinet.

Proper alignment of all air inlets and outlets is essential for optimum performance
of the Air Conditioner.

All externally-mounted Air Conditioners are fully gasketed to ensure proper sealing.
This seal is necessary to maintain the integrity of the closed loop system.

Use all existing mounting holes to insure stability and a tight seal.

High strength mounting screws are recommended.

Attach the brass drain pan fitting and drain hose supplied to the drain exit on the
bottom or lower side panel of the Air Conditioner. The optional field installed
Condensate Evaporator is mounted underneath the Air Conditioner and the drain
hose is connected to the top fitting of the Condensate Evaporator. The drain hoses,
fittings and Condensate Evaporator must be removed before dismounting the Air
Conditioner, as they will not support the weight of the Air Conditioner unit.

The external drain hose must not be elevated above the exit port. Improper mounting
will impede the flow of condensate and may cause internal malfunctions.

CAUTION

If the Air Conditioner is mounted to the cabinet door you must be sure

that the door hinges will support the additional weight of the Air

Conditioner. Also be certain that when the door is opened fully, the

cabinet does not become unbalanced. The actual weight of the unit can

be found on page 8.

When unit is being taken out of service or shipped, the condenser coil

and connecting lines must be cleared of water by using air pressure. This

will prevent damage through freezing.

7

Approximate Weight

(lbs.)

WP28

WP36

WP47

WP52

WP59

90

110

145

150

155

Summary of Contents for K2A3C8WP 5 Series
















Reviews: