6
Water connection
1. The connection between the water pipe and the machine: tear off the external water supply pipe
interface tape as shown in Figure A on the back of the machine, and remove the blue color on the
external water supply pipe interface and the "L-type 3/4 quick connect to 3/4 plug-in" in the
attachment The color "buckles" are removed separately, and then insert the "L-type 3/4 quick-
connect to 3/4 plug-in" into the "outer water supply pipe interface" of the host machine to the
innermost, and then insert the white water pipe in the attachment to the innermost , And finally
snap the two buckles into the two interfaces to complete the connection between the water pipe
and the machine.
Note: To remove the water pipe, first remove the buckle on the interface, push the water pipe
inwards, and then use the fingers of the other hand to press the knife ring that fixes the water pipe,
and then remove the water pipe.
Drain pipe connection: screw the white drain pipe assembly in the attachment into the drain of the
cabinet, and connect the other end of the white drain pipe assembly to the sewer pipe.
1. The host is connected to the drain of the cabinet: when the host is placed on the cabinet,
the drain (position A shown below) of the host needs to be connected with the hole of the
drain baffle on the cabinet (lower Picture B position).
