7
4. Connection of water pipe and faucet: connect the 4-point to 3-pipe conversion head in the
accessory to the valve (thread), after removing the buckle of the adapter, insert the white water
pipe and reset the buckle to complete the connection between the water pipe and the faucet (the
faucet is provided by the user), the external water source needs to reach 0.04 ~ 0.5MPa.If the
water pressure exceeds 0.8MPa, a pressure reducing valve needs to be added (only for external
faucet).
Ice making operation
Operation and its symbol on LCD
CLEAN
1. Turn on the ice machine: plug the power, the symbol of power
will flash
，
press
“ON”/”OFF”, the out tube can input the water from water tank through magnetic valve. The
Machine will start a self-clean after when ready. The symbol
will revolve on the screen. It
Will drain the water after 50s cleaning, add water after 50s draining, and clean again as long as
necessary. Press
“Timing/Cleaning”, it will cancel the cleaning cycle.
2. After cleaning it will begin to make ice
，
the symbol
will be shown on the screen the
symbol
will rotate
；
The ambient temperature will be displayed on the upper left. While
“
25
℃”
Means current temperature. After working for several minutes, there will be a flashed figure
“10M”
on the ambient temperature area
which means ice making countdown of 10 minutes.
3. After every cycle of ice making, there is a process of de-icing. When the ice making symbol
TIMER
How to operate
